014-1065-045 - Follower plate for industrial pumps with shank 45 mm subgroup-Slanghaspel in RVS Do not use inflammable and

Do not use inflammable and corrosive liquids

The operating pressure of the pumps can vary between a minimum of 3 bar and a maximum of 8 bar

åÊ åÊ POSSIBILITIES OF APPLICATION

The range of applications is virtually limitless

014-1065-045 - Follower plate for industrial pumps with shank 45 mm subgroup-Slanghaspel in RVS Do not use inflammable andIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.